Production line for brushing, printing and coating plates
The purpose of the line is to continuously supply a brushing machine, a marker and a machine for applying a protective film to the surface of the aluminum plates.
The plates enter and leave the work area by means of shuttles; the plates are taken from the loading shuttle by means of a linear axis robot with gripper with suckers and deposited on a roller conveyor equipped with a plate centering system along the longitudinal axis of the line and with an anti-sliding device of the plates during alignment .
The plates run along all the stations, brushing, marking and coating to be then unloaded and stacked at the end of the line on a shuttle
The line guarantees an intensive production of the final product process before shipment.
N ° 2 shuttles, one for loading and one for unloading
N ° 1 robots with 2 linear axes, one for loading and one for unloading
N ° 2 suction grippers
N ° 1 roller conveyors
N ° 1 plate alignment system
N ° 1 antiscisciamento system to protect the surface of the plates
N ° 1 command and control unit
N ° 1 set of fences
Length1.400 ÷ 15.000 mm
Width1.000 ÷ 3.000 mm
Thickness2 ÷ 250 mm
Weight max. 10.000 Kg
X – stroke 4.200 mm
Z – stroke1.800 mm
Control and power unit SIEMENS
SIEMENS COMMAND AND CONTROL UNIT
HMIKTP (last generation)
Servo-motorsSIMOTICS SINAMICS series
Motion controllerSINAMICS S120
Stroke 21.000 mm
Payload max. 40.000 Kg
Stack height max. 1.000 mm
Do you want to receive more information?
Contact us now and we will be happy to study a solution tailored to the needs of your company